I needed something for the entryway of our new house, and didnt feel like going to Ikea I probably should have gone to ikea. Its not the worst thing Ive ever bought, but its definitely lacking in stability. I had to put cardboard under the front two legs because of how much it leaned forward when I put it against the wall. The drawer would have been better off with one knob in the middle, even on the tracks the drawer wants to wobble side to side when you open it. The instructions werent super clear and left a lot to be desired. It works for what I needed it for, but I wouldnt recommend it to a friend.
This piece, of course, comes completely knocked down. All the holes were accurately drilled, and the hardware fit and worked very well. It builds into a sturdy, surprisingly heavy (~45 lb) console table. You will need to read and understand the instructions. Three points: 1) make sure the silvery cam bolts (A) are screwed in straight. 2) The front screw that attaches the glider(s) to the side panel(s) needs to go into the first (round) hole behind the roller. the rear screw will take care of itself. 3) Part 6 has two holes in one edge and two holes in one flat side. The edge holes need to be on top (up) in order to properly attach the top, and the two other holes should go to the inside of the assembly.
My wife loves her new table!!
Let me start off by saying, Im TERRIBLE at assembly and I would not have been able to do this myself. That said, my boyfriend had minimal issues following the directions.
It did take about an hour, and having a power drill made it a lot easier. It did come with an Allen wrench, but youll still need a screw driver.
Took a while to put together, but its sturdy. I like it! My only reason I gave it 4 stars is due to the drawer. It seems a bit flimsy so Im only storing light items inside. Overall, shelves and top are very sturdy.
One cam screw didnt have the Phillips head finished on it. I just used pliers to screw it in. Instructions were a little vague in how to put drawer hardware on. Overall was about a hour and a half job by myself. Nice item! Very sturdy. I wish manufacturers would add a couple spare hardware items. In case you mess one up. Would recommend item
This table works well enough for the cost, but it was delivered in the box with several chips in the individual pieces, and the main reason Im giving this 2 stars is because some of the holes were drilled in the wrong place which leaves you unable to assemble to table. Luckily I have a power drill and was able to drill new holes so I could assemble the table, but it wouldnt have been possible without it.
Reviews
nice size, nice weight,
The drawer was easy to assemble. The entire piece of furniture looks very nice.
Beautiful addition to my home
Beautiful addition to my home love the extra room to display more of my bits and bobbles. Not to hard to put together.
Go to ikea instead
I needed something for the entryway of our new house, and didnt feel like going to Ikea I probably should have gone to ikea. Its not the worst thing Ive ever bought, but its definitely lacking in stability. I had to put cardboard under the front two legs because of how much it leaned forward when I put it against the wall. The drawer would have been better off with one knob in the middle, even on the tracks the drawer wants to wobble side to side when you open it. The instructions werent super clear and left a lot to be desired. It works for what I needed it for, but I wouldnt recommend it to a friend.
Understand and follow the instructions!
This piece, of course, comes completely knocked down. All the holes were accurately drilled, and the hardware fit and worked very well. It builds into a sturdy, surprisingly heavy (~45 lb) console table. You will need to read and understand the instructions. Three points: 1) make sure the silvery cam bolts (A) are screwed in straight. 2) The front screw that attaches the glider(s) to the side panel(s) needs to go into the first (round) hole behind the roller. the rear screw will take care of itself. 3) Part 6 has two holes in one edge and two holes in one flat side. The edge holes need to be on top (up) in order to properly attach the top, and the two other holes should go to the inside of the assembly. My wife loves her new table!!
Nice table good price
Nice table, use in my office. Would be best on a tile or wood surface. Easy to assemble.
Super cute
Let me start off by saying, Im TERRIBLE at assembly and I would not have been able to do this myself. That said, my boyfriend had minimal issues following the directions. It did take about an hour, and having a power drill made it a lot easier. It did come with an Allen wrench, but youll still need a screw driver.
very sturdy, flimsy drawer
Took a while to put together, but its sturdy. I like it! My only reason I gave it 4 stars is due to the drawer. It seems a bit flimsy so Im only storing light items inside. Overall, shelves and top are very sturdy.
Lovey table
Table is what was expected. Easy to assemble by myself in a short amount of time. Nice sturdy addition to an entryway.
Instructions a little confusing
One cam screw didnt have the Phillips head finished on it. I just used pliers to screw it in. Instructions were a little vague in how to put drawer hardware on. Overall was about a hour and a half job by myself. Nice item! Very sturdy. I wish manufacturers would add a couple spare hardware items. In case you mess one up. Would recommend item
Unable to assemble if you dont have your own drill to correct hole placement
This table works well enough for the cost, but it was delivered in the box with several chips in the individual pieces, and the main reason Im giving this 2 stars is because some of the holes were drilled in the wrong place which leaves you unable to assemble to table. Luckily I have a power drill and was able to drill new holes so I could assemble the table, but it wouldnt have been possible without it.
Add a review