Decent quality for the price point. Requires two people move and assemble, and over four hours of assembly time with basic tools
Overall, this is a decent quality, young childrens bed for the price point. There are some issues with quality control, primarily a result of lesser quality lumber, but not unexpected due to the cost. As shipped, the box requires two people to move around. Assembly is tedious, but only requires a second person to mount the upper bunk on the lower. A drill will greatly speed up assembly time.
The bed is constructed from a combination of pine for the finished pieces and plywood/laminate for the mattress slats. It appears that the pine has not been dried completely before milling and some the pieces may develop cracks over time as a result. Obviously, cracks can weaken the beds structural integrity depending on their severity and location. In the three months since purchase, I have noticed only a few small cracks in the spacers between the top bunk slats, nothing that has given me concerns about integrity or safety.
The bed requires full assembly, headers and footers are boxed as components, not completed pieces. Hardware consists of Allen bolts, cabinet nuts, wood screws and wooden dowels. Although easy to assemble with a Phillips screwdriver and the included Allen wrench, it is a tedious affair. The use of t/handled Allen wrenches, and a drill with both screw and hex bits, will reduce build time. I also recommend the use of wood glue during assembly of the headers and footers.
Assembly was straightforward, taking approximately three hours with the aforementioned tools and glue. The instructions were clear and easy to understand. The only issues I encountered during assembly were difficult to remove labels identifying each of the wood parts, and plywood had separated on two of the bed slats requiring glue and clamps to repair. All of the pre/drilled holes and screw marks lined up. Mounting the top bunk frame proved to be a two/person task, but the remainder could be managed by one person.
The slats are spaced too far apart for the use of a futon/style mattress.
As shipped, this is not a bed for adult use. It may be possible for a single adult to sleep on the lower bunk, but this will require more sturdy slats and a foundation. Adults and older children should not use the top bunk at all. The guard rails are of a safe height, but like the ladder, limited to the pictured configuration.
The bed is finished with a low/gloss white paint. I saw no visible drips or runs during assembly. Well done, great delivery
Decent quality for the price point. Requires two people move and assemble, and over four hours of assembly time with basic tools
Overall, this is a decent quality, young childrens bed for the price point. There are some issues with quality control, primarily a result of lesser quality lumber, but not unexpected due to the cost. As shipped, the box requires two people to move around. Assembly is tedious, but only requires a second person to mount the upper bunk on the lower. A drill will greatly speed up assembly time. The bed is constructed from a combination of pine for the finished pieces and plywood/laminate for the mattress slats. It appears that the pine has not been dried completely before milling and some the pieces may develop cracks over time as a result. Obviously, cracks can weaken the beds structural integrity depending on their severity and location. In the three months since purchase, I have noticed only a few small cracks in the spacers between the top bunk slats, nothing that has given me concerns about integrity or safety. The bed requires full assembly, headers and footers are boxed as components, not completed pieces. Hardware consists of Allen bolts, cabinet nuts, wood screws and wooden dowels. Although easy to assemble with a Phillips screwdriver and the included Allen wrench, it is a tedious affair. The use of t/handled Allen wrenches, and a drill with both screw and hex bits, will reduce build time. I also recommend the use of wood glue during assembly of the headers and footers. Assembly was straightforward, taking approximately three hours with the aforementioned tools and glue. The instructions were clear and easy to understand. The only issues I encountered during assembly were difficult to remove labels identifying each of the wood parts, and plywood had separated on two of the bed slats requiring glue and clamps to repair. All of the pre/drilled holes and screw marks lined up. Mounting the top bunk frame proved to be a two/person task, but the remainder could be managed by one person. The slats are spaced too far apart for the use of a futon/style mattress. As shipped, this is not a bed for adult use. It may be possible for a single adult to sleep on the lower bunk, but this will require more sturdy slats and a foundation. Adults and older children should not use the top bunk at all. The guard rails are of a safe height, but like the ladder, limited to the pictured configuration. The bed is finished with a low/gloss white paint. I saw no visible drips or runs during assembly. Well done, great delivery