Fantastic Quality and easy to put together also tips for putting it together
Didnt take me long at all to put together. This bed is very good quality, very sturdy. The paint finish is very good and even, the holes all match up. Do yourself a favor though, get yourself a decent hex wrench with a handle on it - it will make all the difference in the world. As I am putting a foam mattress on it I will be making a bed board of 1/4 plywood to go over the slats.
For those new to assembling things like this: Dont try to assemble it while it is standing up. Get yourself a little wood glue and put a dab in each hole where the slats go on the side panel (dont use the foam stoppers), assemble it while it is lying on the floor. Do the same for the backboard. With the backboard lying on the floor fit one side panel on and screw the screws in. Then put the other side panel into place. Very carefully put the front bed rail in then fasten the screws on the side panel. Again, very carefully turn the bed where the backboard is on the floor and finish installing the front rail screws.
Fantastic Quality and easy to put together also tips for putting it together
Didnt take me long at all to put together. This bed is very good quality, very sturdy. The paint finish is very good and even, the holes all match up. Do yourself a favor though, get yourself a decent hex wrench with a handle on it - it will make all the difference in the world. As I am putting a foam mattress on it I will be making a bed board of 1/4 plywood to go over the slats. For those new to assembling things like this: Dont try to assemble it while it is standing up. Get yourself a little wood glue and put a dab in each hole where the slats go on the side panel (dont use the foam stoppers), assemble it while it is lying on the floor. Do the same for the backboard. With the backboard lying on the floor fit one side panel on and screw the screws in. Then put the other side panel into place. Very carefully put the front bed rail in then fasten the screws on the side panel. Again, very carefully turn the bed where the backboard is on the floor and finish installing the front rail screws.