The console was well made, sturdy and instructions were understandable.
A suggestion / Step 14 would have been much easier if it was done before Step 12. The door stoppers would have been much easier to get to then. Also the pilot holes in steps 14, 17 19 were too small and too shallow. I had to drill them a little larger and deeper in order to imbed the screws. Otherwise the screws were not going to go in and were way too tight. Also I had some colored tough up pens that I used to cover some minor scratches. It might be a good idea to include a touch up pen of the right shade in the kit.
The console was well made, sturdy and instructions were understandable.
A suggestion / Step 14 would have been much easier if it was done before Step 12. The door stoppers would have been much easier to get to then. Also the pilot holes in steps 14, 17 19 were too small and too shallow. I had to drill them a little larger and deeper in order to imbed the screws. Otherwise the screws were not going to go in and were way too tight. Also I had some colored tough up pens that I used to cover some minor scratches. It might be a good idea to include a touch up pen of the right shade in the kit.