As per the title: the both bed frames are larger than a standard twin (top bunk) and full (bottom bunk). More information and what I did as workarounds are below.
That said, pros:
/ Sturdy. Very sturdy. Its going no where.
/ Easy to assemble with clear directions and parts very well labeled
/ Pro, but mostly opinion: attractive piece that looks more expensive than it was
Cons:
/ Top bunk: standard twin size mattress is 4 inches shorter than the frame, width close enough once bed was made (maybe 0.5/0.75 inch per side unmade)
/ Bottom bunk: standard full mattress is 2/3 inches narrower than frame on both sides, length fine
/ Most of the build requires an Allen wrench which adds to time to build (and painful on the hands after awhile)
Neutral:
/ Takes about 4 hours to assemble, which would be expected considering, but something to be aware of
/ Did not have a strong smell as per some reviews
/ Direction of bottom bunk can be flipped and is in directions how to do so
/ Be aware all three windows for top bunk are the same height as the top rail and large, so potentially easy to fall out of if a child isnt careful/supervised
/ Note this is a junior height loft, so clearance/head room for the full bed is limited
/ Spacing between ladder rungs is relatively large
Additional notes:
/ We used an existing 14 mattress with topper so head room is extremely limited. Based on experience, would suggest an 8, 10 maximum mattress for the bottom bunk
/ Purchased a 6 memory foam mattress for the top, did not immediately notice any sagging between the slats which are 4 apart, but purchased a bunkie board for the top bunk for additional support (maybe not necessary, but the spacing is enough with a non/spring mattress for concern). Top bunk can easily accommodate an 8 mattress with plenty of safety railing left above it.
/ To resolve lengthwise gap in top bunk, purchased a trianglular bed wedge (VEKKIA Twin Size Bed Wedge Pillow) and placed it point/down in the gap at the head of the mattress which closed the gap nicely
/ To resolve the side gaps on the bottom bunk, determined space between corner supports of frame is 38 and filled gaps on each side with two bench cushions (one on each side). Purchased Klear Vu The Gripper Non/Slip Tufted Omega Universal Bench Cushion, 36 inch.
/ Due to not having a headboard plus frame creating space between head of bed and wall for bottom bunk, purchased another bed wedge to fill in the gap
/ Modifications with cushions and wedges cost an additional 140 plus 60 for the bunkie board, which is something to consider into the price. In retrospect, I may have chosen a different bed at that higher total price point to save the aggravation of the workarounds.
My child absolutely loves the bed and beyond having to solve for the length/width issues, I found the assembly a breeze and believe it to be a solid piece of furniture. Really Happy!!
Warning: Great Bed, but NOT standard size
As per the title: the both bed frames are larger than a standard twin (top bunk) and full (bottom bunk). More information and what I did as workarounds are below. That said, pros: / Sturdy. Very sturdy. Its going no where. / Easy to assemble with clear directions and parts very well labeled / Pro, but mostly opinion: attractive piece that looks more expensive than it was Cons: / Top bunk: standard twin size mattress is 4 inches shorter than the frame, width close enough once bed was made (maybe 0.5/0.75 inch per side unmade) / Bottom bunk: standard full mattress is 2/3 inches narrower than frame on both sides, length fine / Most of the build requires an Allen wrench which adds to time to build (and painful on the hands after awhile) Neutral: / Takes about 4 hours to assemble, which would be expected considering, but something to be aware of / Did not have a strong smell as per some reviews / Direction of bottom bunk can be flipped and is in directions how to do so / Be aware all three windows for top bunk are the same height as the top rail and large, so potentially easy to fall out of if a child isnt careful/supervised / Note this is a junior height loft, so clearance/head room for the full bed is limited / Spacing between ladder rungs is relatively large Additional notes: / We used an existing 14 mattress with topper so head room is extremely limited. Based on experience, would suggest an 8, 10 maximum mattress for the bottom bunk / Purchased a 6 memory foam mattress for the top, did not immediately notice any sagging between the slats which are 4 apart, but purchased a bunkie board for the top bunk for additional support (maybe not necessary, but the spacing is enough with a non/spring mattress for concern). Top bunk can easily accommodate an 8 mattress with plenty of safety railing left above it. / To resolve lengthwise gap in top bunk, purchased a trianglular bed wedge (VEKKIA Twin Size Bed Wedge Pillow) and placed it point/down in the gap at the head of the mattress which closed the gap nicely / To resolve the side gaps on the bottom bunk, determined space between corner supports of frame is 38 and filled gaps on each side with two bench cushions (one on each side). Purchased Klear Vu The Gripper Non/Slip Tufted Omega Universal Bench Cushion, 36 inch. / Due to not having a headboard plus frame creating space between head of bed and wall for bottom bunk, purchased another bed wedge to fill in the gap / Modifications with cushions and wedges cost an additional 140 plus 60 for the bunkie board, which is something to consider into the price. In retrospect, I may have chosen a different bed at that higher total price point to save the aggravation of the workarounds. My child absolutely loves the bed and beyond having to solve for the length/width issues, I found the assembly a breeze and believe it to be a solid piece of furniture. Really Happy!!